CUH SDVC21-S VIBRATOR CONTROLLER
₹5,500.00 Original price was: ₹5,500.00.₹4,800.00Current price is: ₹4,800.00.
CUH SDVC21-S VIBRATOR CONTROLLER
Product Specifications
- Protection Level IP67
- Frequency (MHz) Hertz (HZ)
- Rated Voltage Volt (V)
- Energy Consumption Energy
- Dimension(L*W*H) Millimeter (mm)
- Weight Grams (g)
Product Description
Features
Soft Startup : In order to avoid sudden shock to the feed material and vibratory feeder, the controller can gently increase output voltage from 0 to the preset value when startup.
Preset Speeds : 4 preset feed speeds can be stored and output by external short-circuit signal.
Remote ON/OFF Control : The controller has 2 groups of ON/OFF control pins. Switch sensor or PLC can be connected to them to turn on/off the controller.
Photoelectric ON/OFF Control : The CUH Intelligent Photoelectric Sensor can be connected to turn on/off the controller.
Remote Speed Control : Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power associated with logical relation setting of the ON/OFF Control to drive a solenoid, an electrical relay or other external devices.
Overheat Protection : If internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If output current exceeds its rated value by mis-operation, the controller will stop its output to protect the
controller and vibratory feeder.
Short-Circuit Protection: If output of the controller is short-circuited, the fuse inside the controller will be blown to protect the controller and vibratory feeder from further damage.
Technical Specifications
| ITEM |
Range |
Unit |
Description |
| Min |
Max |
| Input voltage |
85 |
260 |
V |
AC RMS Value |
| Output voltage |
0 |
260 |
V |
Less than Input voltage |
| Output Current |
0 |
6 |
A |
|
| Output Frequency |
50/100 |
Hz |
Mains Frequency is 50Hz |
| 60/120 |
Hz |
Mains Frequency is 60Hz |
| OutPut Power |
0 |
1320 |
VA |
|
| Output Waveform |
Tangent Sine |
|
|
| Viltage Adjestment Accuracy |
1 |
v |
|
| ON/OFF delay |
0 |
20 |
s |
|
| ON/OFF Delay Accuracy |
0.1 |
s |
|
| Soft Startup Time |
0 |
10 |
s |
|
| DC Control output Voltage |
22 |
26 |
V |
DC output associated with ON/OFF control |
| DC Control output current |
0 |
200 |
mA |
| Stand by Power Consumption |
1.5 |
3 |
w |
|
| Display Method |
5 |
Digit |
LED Digital Tube |
| Control Method |
1-5 |
V |
Remote Speed
Control Voltage |
| Standard TTL Electric Level |
Switching Signal |
|
| / |
6 Buttons + LED screen |
|
Work Space
Temperature |
-10 |
60 |
°C |
Non-Condensing |
| Work Space Humidity |
10 |
85 |
%v |
10 in stock
Description
CUH SDVC21-S VIBRATOR CONTROLLER
Product Specifications
Product Description
Features
Soft Startup : In order to avoid sudden shock to the feed material and vibratory feeder, the controller can gently increase output voltage from 0 to the preset value when startup.
Preset Speeds : 4 preset feed speeds can be stored and output by external short-circuit signal.
Remote ON/OFF Control : The controller has 2 groups of ON/OFF control pins. Switch sensor or PLC can be connected to them to turn on/off the controller.
Photoelectric ON/OFF Control : The CUH Intelligent Photoelectric Sensor can be connected to turn on/off the controller.
Remote Speed Control : Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power associated with logical relation setting of the ON/OFF Control to drive a solenoid, an electrical relay or other external devices.
Overheat Protection : If internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If output current exceeds its rated value by mis-operation, the controller will stop its output to protect the
controller and vibratory feeder.
Short-Circuit Protection: If output of the controller is short-circuited, the fuse inside the controller will be blown to protect the controller and vibratory feeder from further damage.
Technical Specifications
ITEM
|
Range
|
Unit
|
Description
|
Min
|
Max
|
Input voltage
|
85
|
260
|
V
|
AC RMS Value
|
Output voltage
|
0
|
260
|
V
|
Less than Input voltage
|
Output Current
|
0
|
6
|
A
|
|
Output Frequency
|
50/100
|
Hz
|
Mains Frequency is 50Hz
|
60/120
|
Hz
|
Mains Frequency is 60Hz
|
OutPut Power
|
0
|
1320
|
VA
|
|
Output Waveform
|
Tangent Sine
|
|
|
Viltage Adjestment Accuracy
|
1
|
v
|
|
ON/OFF delay
|
0
|
20
|
s
|
|
ON/OFF Delay Accuracy
|
0.1
|
s
|
|
Soft Startup Time
|
0
|
10
|
s
|
|
DC Control output Voltage
|
22
|
26
|
V
|
DC output associated with ON/OFF control
|
DC Control output current
|
0
|
200
|
mA
|
Stand by Power Consumption
|
1.5
|
3
|
w
|
|
Display Method
|
5
|
Digit
|
LED Digital Tube
|
Control Method
|
1-5
|
V
|
Remote Speed
Control Voltage
|
Standard TTL Electric Level
|
Switching Signal
|
|
/
|
6 Buttons + LED screen
|
|
Work Space
Temperature
|
-10
|
60
|
°C
|
Non-Condensing
|
Work Space Humidity
|
10
|
85
|
%v
|
Reviews
There are no reviews yet.